Dimension ES-2008 Ethernet Switch

Follow the instructions in the table below to configure this screen.

 

Table 15-4 SMT: Add a VLAN Group

 

 

FIELD

DESCRIPTION

 

 

VLAN Name

Enter a descriptive name for the VLAN group for identification purposes.

 

 

VLAN ID

Enter a number between 1 and 4049 as the identification number for the

 

VLAN group.

 

 

Port

This read-only field displays the trunk group number or port numbers for

 

ports not belonging to a trunk group.

 

Note: This field is 0 to indicate that a port is in a trunk group.

 

 

Member

Ports are assigned membership in a VLAN by associating a VLAN ID with

 

the ports

 

Press [SPACE BAR] to select Tagged, UnTagged or No.

 

Select Tagged to tag all outgoing frames on this port.

 

Select Untagged not to tag all outgoing frames on this port.

 

Select No to prevent a port from joining a VLAN group

 

 

Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save> and press [ENTER] to save the settings back to the switch.

15.3.3 Port-Based VLAN Configuration

Step 1. In the Configure VLAN Type screen and select Port-Based in the VLAN Mode field.

Step 2. Press any key to display the screen as shown in Figure 15-6.Follow the instruction in Table 15-3to set the fields in the Create a VLAN Group screen.

15.3.4 Creating a New VLAN Group

You can add a new port-based or tag-based VLAN group. Follow the steps below to create a new tag-based VLAN group.

Step 1. In the Configure VLAN Type screen, select Create a VLAN Group and press [ENTER] to display the Create a VLAN Group screen as shown in Figure 15-6.

Step 2. Select Add a VLAN Group. Refer to Table 15-3to set the fields.

15.3.5 Changing VLAN Group Settings

Follow the steps below to change VLAN group settings or delete a VLAN group.

Switch Configuration

15-7