Dimension ES-2008 Ethernet Switch

 

 

Table 9-2 VLAN Setup: Port-based Configuration

 

 

 

 

FIELD

DESCRIPTION

 

 

 

 

Group Name

Enter a descriptive name to identify the VLAN.

 

 

 

 

VLAN ID

Enter a VLAN identification number. The number must be between 1 and

 

 

4094.

 

 

 

 

 

Add

Select a port number from the left selection list and click Add to add the

 

 

port to the VLAN.

Remove

Select a port number from the right selection list and click Remove to

 

 

remove the port from the VLAN.

 

 

 

 

 

 

 

 

Ports in the same VLAN must be in the same trunk group.

9.5Tag-Based VLAN Configuration

Follow the steps below to configure VLANs on the switch.

Step 1. In the Switch Configuration screen, select either 802.1Q with GVRP or 802.1Q without GVRP from the VLAN Operation Mode drop-down list box. Then click Apply.

Step 2. Click Administrator and then VLAN Configuration to display the basic VLAN screen as shown next.

Figure 9-4 VLAN Setup – 802.1Q with/without GVRP VLAN Information

9-4

VLAN