Dimension
Dimension Switch
========================
Port Mirroring State: Enable
Analysis Port: 1
Port | Type |
| Action |
1. | 10/100TX | None | |
2. | 10/100TX | RX | |
3. | 10/100TX | TX | |
Trk1. | 10/100TX | Both | |
Trk2. | 10/100TX | None | |
0. | 10/100TX | None | |
0. | 10/100TX | None | |
0. | 10/100TX | None | |
9. | 100FX |
| None |
<Quit> | <Edit> | <Save> |
Edit the mirroring configuration.
Tab=Next Item BackSpace=Previous Item Space=Toggle Esc=Action menu
FigureThe Type field for port 9 varies depending on your switch model.
Follow the instructions in the table next to configure the fields in this screen.
| Table |
|
|
FIELD | DESCRIPTION |
|
|
Port Mirror | Press [SPACE BAR] and [ENTER] to select YES to activate the port |
State | mirroring feature and set the related fields below. |
|
|
Analysis Port | Press [SPACE BAR] and [ENTER] to select a port number as the mirror |
| port. |
|
|
Port | This |
| ports not in a trunk group. |
| Note: This field is 0 to indicate that a port is in a trunk group. |
|
|
Type | This |
| for the fiber port on the switch. |
Switch Configuration |