Dimension
Chapter 2
Hardware Description and
Installation
This chapter describes the switch hardware and installation
2.1Hardware Installation
The switch is suitable for an office environment where it can be placed on a desktop. Step 1. Make sure the switch is clean and dry.
Step 2. Attach the supply rubber feet to the bottom of the switch.
Step 3. Set the switch on a smooth and sturdy flat space strong enough to support the weight of the switch and the connected cables. Make sure there is a power outlet nearby.
Step 4. Make sure there is enough clearance around the switch to allow air circulation and the attachment of cables and the power cord.
Do not block the ventilation holes. Leave space between switches
when stacking.
2.2Hardware Connections
2.2.1 Front Panel
The front panel of the switch consists of eight
The LEDs are also located on the front panel of the switch.
Figure 2-1 ES-2008
Hardware Description and Installation |