Dimension
Dimension Switch
========================
Enable/Disable STP Function
STP Parameters Setup
STP Per Port Setting
Previous Menu
Tab=Next Item | Enable or disable the Spanning Tree Protocol. | |
BackSpace=Previous Item | Enter=Select Item |
16.2.1 Enable STP
To enable STP, select Enable/Disable STP Function in the STP Configuration screen and press [ENTER] to display the screen as shown next.
Press [SPACE BAR] and [ENTER] to select Enable in the STP field and save the settings.
Dimension Switch
========================
| STP :Enabled |
| |
<Edit> | <Save> | <Quit> | |
|
| Select the action menu. |
|
Tab=Next Item | BackSpace=Previous Item Space=Toggle | Esc=Action menu |
16.2.2 Configure System Parameters
Use the STP Parameters Setup screen to configure the system parameters for STP. Refer to the Configuring Spanning Tree Parameters section for field descriptions.
Protocol Related Configuration |