Dimension
Dimension Switch
========================
Root Bridge Information | Configure Spanning Tree Parameters | |||
Priority | : | 32768 | Priority | : 32768 |
Mac Address | : | 00001C01016C | Max Age | : 20 |
Root Path Cost: | 0 | |||
Root Port | : | Root | Hello Time | : 2 |
Max Age | : | 20 | ||
Hello Time | : | 2 |
|
|
Forward Delay : 15 | Forward Delay Time | ||
<Edit> | <Save> | <Quit> | |
| Select | the action menu. |
|
Tab=Next Item | BackSpace=Previous | Item Quit=Previous menu Enter=Select Item |
16.2.3 Configuring STP Parameters Per Port
Use the STP Per Port Setting screen to set up STP parameters for each port on the switch.
Dimension Switch
========================
Port | State | Path Cost | Priority |
1. | Disabled | 10 | 128 |
2. | Forwarding | 10 | 128 |
3. | Disabled | 10 | 128 |
4. | Disabled | 10 | 128 |
5. | Disabled | 10 | 128 |
6. | Disabled | 10 | 128 |
7. | Disabled | 10 | 128 |
8. | Disabled | 10 | 128 |
9. | Disabled | 10 | 128 |
<Edit> | <Save> | <Quit> | |
| Select the Action menu. |
| |
Tab=Next Item | BackSpace=Previous Item Quit=Previous menu Enter=Select Item |
The following table describes the fields in this screen.
Protocol Related Configuration |