Dimension
Chapter 14
Basic System Setup
This chapter shows you how to set up the switch for administrative purposes.
14.1 Introduction
Use the menus in the Switch Configurations screen to configure the switch.
In the main menu, press [TAB] to select Switch Configuration and press [ENTER] to display the Switch Configuration menu as shown next.
Dimension Switch
========================
|
| Administration Configuration |
| |
| Port/Trunk Configuration | |||
| Port Mirroring Configuration | |||
| VLAN Configuration |
|
| |
| Priority Configuration | |||
| MAC Address Configuration | |||
| Misc Configuration |
|
| |
| Main Menu |
|
| |
|
| |||
| Configure the system,IP,and password. | |||
Tab=Next Item | BackSpace=Previous Item | Enter=Select Item |
Figure 14-1 SMT: Switch Configuration
The following table describes each submenu in this screen.
Table 14-1 Switch Configuration Menu Choice
SUBMENU | DESCRIPTION |
|
|
Administration | Use this menu to set the system name, IP address and |
Configuration | password |
|
|
Port/Trunk Configuration | Use this menu to configure and display port settings and set |
| up trunk groups. |
|
|
Basic System Setup |