Dimension
16.5.2 Port State Activity
Select Port State Activity in the LACP Configuration screen and press [ENTER] to display the screen as shown.
Dimension Switch
========================
Port State Activity
1Passive
2Passive
3Passive
4Passive
7Active
8Active
<Edit> | <Save> | <Quit> | |
| Select | the action menu. |
|
Tab=Next Item | BackSpace=Previous | Item Quit=Previous menu Enter=Select Item |
The following table describes the fields in this screen.
| Table |
|
|
FIELD | DESCRIPTION |
|
|
Port | This |
| group. |
| For example, in Figure |
| dynamic trunk group. |
|
|
State Activity | Press [SPACE BAR] to select either Passive or Active and press |
| [ENTER]. |
| Select Active to have the port automatically send LACP packets to |
| another trunk port on the other side of the link to negotiate a trunk link |
| configuration. |
| Select Passive to have the port respond to LACP packets but cannot |
| negotiate a trunk link configuration with another trunk port on the other |
| end of the link. This is the default setting for all ports. |
|
|
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save> and press [ENTER] to save the settings back to the switch.
16.5.3 LACP Group Status
The LACP Group Status screen displays the ports in a static trunk group.Protocol Related Configuration |