Dimension ES-2008 Ethernet Switch

9.4Port-Based VLAN Configuration

Follow the steps below to configure port-based VLANs.

Step 1. In the Switch Configuration screen, select Port-Based from the VLAN Operation Mode drop-down list box. Then click Apply.

Step 2. Click VLAN Configuration in the navigation menu to display the setup screen as shown next.

Figure 9-2 VLAN Setup: Port-based VLAN Information

Step 3. Click Add to configure a new port-based VLAN. The following screen displays.

Figure 9-3 VLAN Setup: Port-based Configuration

Follow the instructions in the table next to configure this screen.

VLAN

9-3