Dimension ES-2008 Ethernet Switch

 

Table 16-1 SMT: STP Per Port Setting

 

 

FIELD

DESCRIPTION

 

 

Port

This read-only field displays the port number on the switch.

 

 

State

This read-only field displays the state of the port. The state can be

 

Forward, Disable, Blocking, Learning and Listening.

Path Cost

Enter a number between 1 and 65535 in the Path Cost field. The smaller

 

the number the lower the path cost is for the port.

Priority

Enter a number between 0 and 255 in the Priority field. The smaller the

 

number, the higher the priority.

Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save> and press [ENTER] to save the settings back to the switch.

16.3 SNMP Configuration

Refer to the SNMP chapter for more information on SNMP.

To configure SNMP, use the menus in the SNMP Configuration screen as shown next.

Intelligent Switch : SNMP Configuration

===================

System Options

Community Strings

Trap Managers

Previous Menu

 

Configure the system information.

Tab=Next Item

BackSpace=Previous Item

Enter=Select Item

Figure 16-6 SMT: SNMP Configuration

16.3.1 System Options

Use the System Options screen to set up system parameters for SNMP.

16-4

Protocol Related Configuration