Dimension
Intelligent Switch : VLAN Support Configuraton
===================
VLAN Mode :Disabled
<Quit> | <Edit> | <Save> | <Previous Page> | <Next Page> | |
|
| Select the Action menu. |
| ||
Tab=Next Item BackSpace=Previous Item | Space=Toggle Ctrl+A=Action menu |
15.3.2 Tag-Based VLAN Configuration
Step 1. In the Configure VLAN Type screen select either 802.1Q or 802.1Q with GVRP in the VLAN Mode field.
Dimension Switch
========================
VLAN Mode :802.1Q |
|
| |
Port | VLAN ID | Ingress | Acceptable |
Filter | Frame Type | ||
1. | 1 | Disable | All |
2. | 1 | Disable | All |
3. | 1 | Disable | All |
Trk1. | 1 | Disable | All |
Trk2. | 1 | Disable | All |
0. | 1 | Disable | All |
0. | 1 | Disable | All |
0. | 1 | Disable | All |
9. | 1 | Disable | All |
<Quit> | <Edit> | <Save> | |
|
| Select the Action menu. | |
Tab=Next Item | BackSpace=Previous Item | Space=Toggle Esc=Action menu |
The following table describes the fields in this screen.
| Table |
|
|
FIELD | DESCRIPTION |
|
|
VLAN | Press [SPACE BAR] and [ENTER] to select either 802.1Q or |
Mode | 802.1QwithGVRP. The following fields display on the screen. |
Switch Configuration |