Dimension
7.2Configuring Port Trunking
Port trunking lets you group up to eight consecutive ports into a single dedicated connection.
To configure port trunking, click Administrator, Trunking and the Aggregator Setting tab.
Figure
| Table |
|
|
FIELD | DESCRIPTION |
|
|
System | Enter a number to identify and set the priority of an active Link Aggregate |
Priority | Control Protocol (LACP). The smaller the number, the higher the priority |
| level. |
Group ID | Select a trunk group ID from the |
| display the configured settings. |
LACP | Select Enable from the |
| dynamic trunk group. |
| Select Disable to set the trunk group as a local trunk group. |
|
|
Port Trunking |