Dimension
Chapter 15
Switch Configuration
This chapter introduces various switch configurations.
15.1 Port and Trunk Group Settings
Refer to the Port Trunking chapter for background information on trunking. Follow the steps below to configure port parameters and set up trunk groups.
Step 1. In the Switch Configuration screen, select Port/Trunk Configuration and press [ENTER] to display the screen as shown next.
Step 2. Select <Edit> in the actions menu and press [ENTER] to move the cursor to the configuration fields.
Dimension Switch
========================
Port | Type | Enabled | Auto | Speed/Duplex | Flow | Group |
|
|
| Negotiate | Config | Control |
|
1. | 10/100TX | Yes | Enabled | 100 | Full | On | None |
2. | 10/100TX | Yes | Enabled | 100 | Full | On | None |
3. | 10/100TX | Yes | Enabled | 100 | Full | On | None |
4. | 10/100TX | Yes | Enabled | 100 | Full | On | Trunk1 |
5. | 10/100TX | Yes | Enabled | 100 | Full | On | Trunk2 |
6. | 10/100TX | Yes | Enabled | 100 | Full | On | Trunk2 |
7. | 10/100TX | Yes | Enabled | 100 | Full | On | Trunk1 |
8. | 10/100TX | Yes | Enabled | 100 | Full | On | Trunk1 |
9. | 100FX | Yes | Disabled | 100 | Full | On | N/A |
<Quit> | <Edit> | <Save> |
|
|
|
| |
|
| Select the | Action menu. |
|
|
|
|
Tab=Next Item BackSpace=Previous | Item Quit=Previous menu | Enter=Select Item |
Figure 15-1 SMT: Port/Trunk Configuration
Follow the instructions in the next table to set the fields in this screen.
| Table |
|
|
FIELD | DESCRIPTION |
|
|
Port | This |
| fiber/gigabit port) on the switch. |
|
|
Switch Configuration |