NBG-419N User’s Guide 225
CHAPTER 32

Product Specifications

The following tables summarize the NBG-419N’s hardware and firmware features.

Table 79 Hardware Features

Dimensions (W x D x
H)
162 mm x 115 mm x 33 mm
Weight 252 g
Power Specification Input: 100~240 V AC, 50~60 Hz
Output: 12 V DC 1A
Ethernet ports Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
4-5 Port Switch A combination of switch and router makes your NBG-419N a cost-
effective and viable network solution. You can add up to four
computers to the NBG-419N without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the NBG-419N when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
LEDs PWR, LAN1-4, WAN, WLAN, WPS
Reset Button The reset button is built into the rear panel. Use this button to
restore the NBG-419N to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
WPS button Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
Wireless Switch Turn on or turn off the wireless function of the NBG-419N using
this switch. There is no need to go into the Web Configurator.
Antenna The NBG-419N is equipped with two 2dBi (2.4GHz) detachable
antennas to provide clear radio transmission and reception on the
wireless network.
Operation
Environment
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Storage Environment Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%