ZyXEL Communications P-334W 8.2Security Parameters Summary, WEP, WEP, 64-bit, 128-bit, WEP Encryption, Table 8-1Wireless: No Security, Table 8-2Wireless Security Relational Matrix

	Prestige 334W User’s Guide
	Table 8-1 Wireless: No Security
LABEL	DESCRIPTION
802.11 Mode	Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to associate
	with the Prestige.
	Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to associate
	with the Prestige.
	Select Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices to
	associate with the Prestige. The transmission rate of your Prestige might be reduced.
Max. Frame	Enable Maximum Frame Burst to help eliminate collisions in mixed-mode networks
Burst	(networks with both IEEE 802.11g and IEEE 802.11b traffic) and enhance the
	performance of both pure IEEE 802.11g and mixed IEEE 802.11b/g networks. Maximum
	Frame Burst sets the maximum time, in microseconds, that the Prestige transmits IEEE
	802.11g wireless traffic only.
	Type the maximum frame burst between 0 and 1800 (650, 1000 or 1800 recommended).
	Enter 0 to disable this feature. The default is 650.
Apply	Click Apply to save your changes back to the Prestige.
Reset	Click Reset to reload the previous configuration for this screen.

8.2Security Parameters Summary

Refer to this table to see what other security parameters you should configure for each Authentication Method/ key management protocol type. You enter manual keys by first selecting 64-bit WEP or 128-bit WEP from the WEP Encryption field and then typing the keys (in ASCII or hexadecimal format) in the key text boxes. MAC address filters are not dependent on how you configure these security features.

Table 8-2 Wireless Security Relational Matrix

AUTHENTICATION	ENCRYPTION	ENTER	IEEE 802.1X
METHOD/ KEY	METHOD	MANUAL KEY
MANAGEMENT PROTOCOL
Open	None	No	Disable
Open	WEP	No	Enable with Dynamic WEP Key
		Yes	Enable without Dynamic WEP Key
		Yes	Disable
Shared	WEP	No	Enable with Dynamic WEP Key

Wireless Security 8-3