Prestige 334W User’s Guide

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA Only

Metric= 1

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 28-2 Menu 11.3 Applying NAT to the Remote Node

The following table describes the options for Network Address Translation.

Table 28-1 Applying NAT in Menus 4 & 11.3

FIELD

DESCRIPTION

EXAMPLE

 

 

 

NAT

Press [SPACE BAR] and then [ENTER] to select Full Feature if you

Full Feature

 

have multiple public WAN IP addresses for your Prestige. The SMT

 

 

uses the address mapping set that you configure and enter in the

 

 

Address Mapping Set field (menu 15.1 - see section 28.3.1).

 

 

Select None to disable NAT.

None

 

 

 

 

When you select SUA Only, the SMT uses Address Mapping Set 255

SUA Only

 

(menu 15.1 - see section 28.3.1). Choose SUA Only if you have just

 

 

one public WAN IP address for your Prestige.

 

 

 

 

28.3 NAT Setup

Use the address mapping sets menus and submenus to create the mapping table used to assign global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT will use the pre-configured Set 255 (read only).

The server set is a list of LAN servers mapped to external ports. To use this set, a server rule must be set up inside the NAT address mapping set. Please see the section on port forwarding in the chapter on NAT web

NAT

28-3