Prestige 334W User’s Guide

 

Table 6-1 IP

 

 

LABEL

DESCRIPTION

 

 

Allow from LAN to

Select this check box to forward NetBIOS packets from the LAN to the WAN and

WAN

from the WAN to the LAN. If your firewall is enabled with the default policy set to

 

block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall

 

rule that forwards NetBIOS traffic.

 

Clear this check box to block all NetBIOS packets going from the LAN to the WAN

 

and from the WAN to the LAN.

 

 

Apply

Click Apply to save your changes back to the Prestige.

 

 

Reset

Click Reset to begin configuring this screen afresh.

 

 

6.6Configuring Static DHCP

This table allows you to assign IP addresses on the LAN to specific individual computers based on their MAC Addresses.

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02.

To change your Prestige’s Static DHCP settings, click LAN, then the Static DHCP tab. The screen appears as shown.

Figure 6-3 Static DHCP

The following table describes the labels in this screen.

6-8

LAN Screens