Prestige 334W User’s Guide

34.2.3 Example of FTP Commands from the Command Line

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec. ftp> quit

Figure 34-2 FTP Session Example

34.2.4 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.

Table 34-2 General Commands for GUI-based FTP Clients

COMMAND

DESCRIPTION

 

 

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to the

 

server for anonymous access. Anonymous logins will work only if your

 

ISP or service administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

Configuration and firmware files should be transferred in binary mode.

 

 

Initial Remote Directory

Specify the default remote directory (path).

 

 

Initial Local Directory

Specify the default local directory (path).

 

 

34.2.5 TFTP and FTP over WAN Management Limitations

TFTP, FTP and Telnet over WAN will not work when:

1.You have disabled Telnet service in menu 24.11.

2.You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service.

34-4

Firmware and Configuration File Maintenance