Prestige 334W User’s Guide

Menu 15.1.1.1 Address Mapping Rule

Type= One-to-One

Local IP:

Start= 0.0.0.0

End = N/A

Global IP:

Start= 0.0.0.0

End = N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 28-7 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set

The following table explains the fields in this menu.

Table 28-4 Menu 15.1.1.1 Editing/Configuring an Individual Rule in a Set

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Type

Press [SPACE BAR] and then [ENTER] to select from a total of five types.

One-to-One

 

These are the mapping types discussed in the chapter on NAT web

 

 

configurator screens. Server allows you to specify multiple servers of

 

 

different types behind NAT to this computer. See section 28.5.3 for an

 

 

example.

 

 

 

 

Local IP

Only local IP fields are N/A for server; Global IP fields MUST be set for

 

 

Server.

 

Start

This is the starting local IP address (ILA).

0.0.0.0

 

 

 

End

This is the ending local IP address (ILA). If the rule is for all local IPs, then

N/A

 

put the Start IP as 0.0.0.0 and the End IP as 255.255.255.255. This field is

 

 

N/A for One-to-One and Server types.

 

Global IP

 

 

 

 

 

Start

This is the starting inside global IP address (IGA). If you have a dynamic

0.0.0.0

 

IP, enter 0.0.0.0 as the Global IP Start. Note that Global IP Start can be

 

 

set to 0.0.0.0 only if the types are Many-to-Oneor Server.

 

End

This is the ending inside global IP address (IGA). This field is N/A for One-

N/A

 

to-One,Many-to-One and Server types.

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

28-8

NAT