Prestige 334W User’s Guide

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= device filters= Output Filter Sets: protocol filters= device filters=

Call Filter Sets: protocol filters=

device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 25-6 Menu 11.5: Remote Node Filter (PPPoE or PPTP Encapsulation)

25.4.1 Traffic Redirect Setup

Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway using Menu 11.6 — Traffic Redirect Setup.

Menu 11.6 - Traffic Redirect Setup

Active= Yes

Configuration:

Backup Gateway IP Address= 0.0.0.0

Metric= 14

Check WAN IP Address= 0.0.0.0

Fail Tolerance= 2

Period(sec)= 5

Timeout(sec)= 3

Press ENTER to Confirm or ESC to Cancel:

Figure 25-7 Menu 11.6: Traffic Redirect Setup

The following table describes the fields in this screen.

Table 25-5 Menu 11.6: Traffic Redirect Setup

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Active

Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic

Yes

 

redirect setup. The default is No.

 

25-10

Remote Node Configuration