Prestige 334W User’s Guide

Table 28-2 SUA Address Mapping Rules

FIELD

DESCRIPTION

EXAMPLE

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

User-Defined Address Mapping Sets

Now let’s look at option 1 in menu 15.1. Enter 1 to bring up this menu. We’ll just look at the differences from the previous menu. Note the extra Action and Select Rule fields mean you can configure rules in this screen. Note also that the [?] in the Set Name field means that this is a required field and you must enter a name for the set.

Menu 15.1.1 - Address Mapping Rules

Set Name= NAT_SET

Idx Local Start IP Local End IP

Global Start IP Global End IP

Type

------------------ --------------- --------------- --------------- ------

1.

2

3.

4.

5.

6.

7.

8.

9.

10.

Action= Edit

Select Rule=

Press ENTER to Confirm or ESC to Cancel:

Figure 28-6 Menu 15.1.1 First SetIf the Set Name field is left blank, the entire set will be deleted.The Type, Local and Global Start/End IPs are configured in menu 15.1.1.1(described later) and the values are displayed here.Ordering Your Rules

Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are

28-6

NAT