ZyXEL Communications P-334W to denote an ASCII key, Table 23-4Menu 3.5 Wireless LAN Setup, Enter “0x” before the key to denote a, hexadecimal key. Don’t enter “0x” before the key

Prestige 334W User’s Guide

Table 23-4 Menu 3.5 Wireless LAN Setup

FIELD		DESCRIPTION	EXAMPLE
WEP	Select Disable to allow wireless stations to communicate with the access		Disable
	points without any data encryption.
	Select 64-bit WEP or 128-bit WEP to enable data encryption.
Default Key	Enter the key number (1 to 4) in this field. Only one key can be enabled at		1
	any one time. This key must be the same on the Prestige and the wireless
	stations to communicate.
Key 1 to	The WEP keys are used to encrypt data. Both the Prestige and the wireless		0x12345abcd
Key 4	stations must use the same WEP key for data transmission.		e
	If you chose 64-bit WEP in the WEP Encryption field, then enter any 5
	ASCII characters or 10 hexadecimal characters ("0-9", "A-F").
	If you chose 128-bit WEP in the WEP Encryption field, then enter 13 ASCII
	characters or 26 hexadecimal characters ("0-9", "A-F").
		Enter “0x” before the key to denote a
		hexadecimal key. Don’t enter “0x” before the key
		to denote an ASCII key.
Authen.	Press [SPACE BAR] to select Auto, Open System Only or Shared Key		Auto
Method	Only and press [ENTER].
	This field is N/A if WEP is not activated.
	If WEP encryption is activated, the default setting is Auto.
Preamble	Select a preamble type from the drop-down list menu. Choices are Long,		Long
	Short and Auto. The default setting is Auto.
	See the section on preamble for more information.
802.11	Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices		Mixed
Mode	to associate with the Prestige.
	Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices
	to associate with the Prestige.
	Select Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN
	devices to associate with the Prestige. The transmission rate of your
	Prestige might be reduced.

23-8 Menu 3 LAN Setup