Prestige 334W User’s Guide
Table
FIELD | DESCRIPTION | EXAMPLE |
|
|
|
My Password | Enter the password assigned by your ISP when the Prestige calls this | ***** |
| remote node. Valid for PPPoE encapsulation only. |
|
Retype to | Type your password again to make sure that you have entered it | ***** |
Confirm | correctly. |
|
|
|
|
Server | This field is valid only when RoadRunner is selected in the Service |
|
| Type field. The Prestige will find the RoadRunner Server IP |
|
| automatically if this field is left blank. If it does not, then you must enter |
|
| the authentication server IP address here. |
|
|
|
|
Relogin Every | This field is available when you select Telia Login in the Service Type |
|
(min) | field. |
|
| The Telia server logs the Prestige out if the Prestige does not log in |
|
| periodically. Type the number of minutes from 1 to 59 (30 |
|
| recommended) for the Prestige to wait between logins. |
|
|
|
|
Route | This field refers to the protocol that will be routed by your Prestige – IP | IP |
| is the only option for the Prestige. |
|
|
|
|
Edit IP | This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes | No |
| and press [ENTER] to go to Menu 11.3 - Remote Node Network | (default) |
| Layer Options. |
|
Session Options |
|
|
|
|
|
Edit Filter Sets | This field leads to another “hidden” menu. Use [SPACE BAR] to select | No |
| Yes and press [ENTER] to open menu 11.5 to edit the filter sets. See | (default) |
| the Remote Node Filter section for more details. |
|
|
|
|
Edit Traffic | Press [SPACE BAR] to select Yes or No. |
|
Redirect | Select Yes and press [ENTER] to configure Menu 11.6 Traffic |
|
|
| |
| Redirect Setup. Select No (default) if you do not want to configure this |
|
| feature. |
|
Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.
Remote Node Configuration |