Prestige 334W User’s Guide

Table 25-4 Remote Node Network Layer Options

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Multicast

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used

None

 

to establish membership in a Multicast group. The Prestige supports both

(default)

 

IGMP version 1 (IGMP-v1) and version 2 (IGMP-v2). Press [SPACE BAR]

 

 

to enable IP Multicasting or select None to disable it. See the LAN Setup

 

 

chapter for more information on this feature.

 

Once you have completed filling in Menu 11.3 Remote Node Network Layer Options, press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration and return to menu 11, or press [ESC] at any time to cancel.

25.4 Remote Node Filter

Move the cursor to the field Edit Filter Sets in menu 11.1, and then press [SPACE BAR] to set the value to Yes. Press [ENTER] to open Menu 11.5 - Remote Node Filter.

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige to prevent certain packets from triggering calls. You can specify up to 4 filter sets separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this field. For more information on defining the filters, please refer to the Filters chapter. For PPPoE or PPTP encapsulation, you have the additional option of specifying remote node call filter sets.

Menu 11.5 - Remote Node Filter

Input Filter Sets: protocol filters= device filters= Output Filter Sets: protocol filters= device filters=

Enter here to CONFIRM or ESC to CANCEL:

Figure 25-5 Menu 11.5: Remote Node Filter (Ethernet Encapsulation)

Remote Node Configuration

25-9