ZyXEL Communications P-334W Table 18-4Bandwidth Management Configuration

Prestige 334W User’s Guide

The following table describes the labels in this screen.

	Table 18-4 Bandwidth Management Configuration
LABEL	DESCRIPTION
Active	Select this check box to have the Prestige apply bandwidth management.
	Enable bandwidth management to give traffic that matches a bandwidth rule priority over
	traffic that does not match a bandwidth rule.
	Enabling bandwidth management also allows you to control the maximum amounts of
	bandwidth that can be used by traffic that matches a bandwidth rule.
WAN BW Budget	Enter the amount of bandwidth in kbps (2 to 100,000) that you want to allocate for traffic.
(kbps)	20 kbps to 20,000 kbps is recommended.
	The recommendation is to set this speed to be equal to or less than the speed of the
	broadband device connected to the WAN port. For example, set the speed to 1000 Kbps
	(or less) if the broadband device connected to the WAN port has an upstream speed of
	1000 Kbps.
#	This is the number of an individual bandwidth management rule.
Direction	Select To LAN to apply bandwidth management to traffic that the Prestige forwards to
	the LAN.
	Select To WAN to apply bandwidth management to traffic that the Prestige forwards to
	the WAN.
	Select To WLAN to apply bandwidth management to traffic that the Prestige forwards to
	the WLAN.
Name	Use the auto-generated name or enter a descriptive name of up to 20 alphanumeric
	characters, including spaces.
Service	Select a service for your rule or you can define your own in the Edit screen.
Dest Port	Enter the port number of the destination. See Table 18-3for a table of services and port
	numbers.
Priority	Select a priority from the drop down list box. Choose High, Mid or Low.
Edit	Select a rule index number's radio button and then click Edit to set up this bandwidth
	management rule on the Prestige.
Apply	Click Apply to save your customized settings.
Reset	Click Reset to begin configuring this screen afresh.

18-10 Media Bandwidth Management