Prestige 334W User’s Guide

The following table describes the fields in this screen.

Table 36-1 Menu 24.11 – Remote Management Control

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Telnet Server

Each of these read-only labels denotes a service or protocol.

 

FTP Server

 

 

Web Server

 

 

SNMP Service

 

 

DNS Service

 

 

 

 

 

Port

This field shows the port number for the service or protocol. You may

23

 

change the port number if needed, but you must use the same port

 

 

number to access the Prestige.

 

 

 

 

Access

Select the access interface (if any) by pressing [SPACE BAR], then

LAN Only

 

[ENTER] to choose from: LAN only, WAN only, ALL or Disable.

(default)

Secure Client

The default 0.0.0.0 allows any client to use this service or protocol to

0.0.0.0

IP

access the Prestige. Enter an IP address to restrict access to a client

 

 

with a matching IP address.

 

 

 

 

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.

36.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1.A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.

2.You have disabled that service in menu 24.11.

3.The IP address in the Secure Client IP field (menu 24.11) does not match the client IP address. If it does not match, the Prestige will disconnect the session immediately.

4.There is an SMT console session running.

5.There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.

6.There is a firewall rule that blocks it.

36-2

Remote Management