|
| Prestige 334W User’s Guide | |
|
| Table | |
|
|
|
|
| LABEL | DESCRIPTION |
|
|
|
|
|
| Dynamic WEP | Select |
|
| Key Exchange | access the Prestige when you configure dynamic WEP key exchange.This field is not |
|
|
| available when you set Security to WPA or |
|
| Preamble | Select a preamble type from the |
|
|
| Dynamic. The default setting is Long. See the section on preamble for more |
|
|
| information. |
|
|
|
|
|
| 802.11 Mode | Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to |
|
|
| associate with the Prestige. |
|
|
| Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to |
|
|
| associate with the Prestige. |
|
|
| Select Mixed to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices |
|
|
| to associate with the Prestige. The transmission rate of your Prestige might be |
|
|
| reduced. |
|
|
|
|
|
| Max. Frame Burst | Enable Maximum Frame Burst to help eliminate collisions in |
|
|
| (networks with both IEEE 802.11g and IEEE 802.11b traffic) and enhance the |
|
|
| performance of both pure IEEE 802.11g and mixed IEEE 802.11b/g networks. |
|
|
| Maximum Frame Burst sets the maximum time, in microseconds, that the Prestige |
|
|
| transmits IEEE 802.11g wireless traffic only. |
|
|
| Type the maximum frame burst between 0 and 1800 (650, 1000 or 1800 |
|
|
| recommended). Enter 0 to disable this feature. The default is 650. |
|
| Apply | Click Apply to save your changes back to the Prestige. |
|
|
|
|
|
| Reset | Click Reset to reload the previous configuration for this screen. |
|
|
|
|
|
8.12 Configuring 802.1x and Static WEP Key Exchange
In order to configure and enable 802.1x and Static WEP Key Exchange; click the WIRELESS link under ADVANCED to display the Wireless screen. Select 802.1x + Static WEP from the Security list.
Wireless Security |