ZyXEL Communications unified security gateway manual 170

Chapter 8 Dashboard

Table 19 Dashboard (continued)

LABEL	DESCRIPTION
Interface	If an Ethernet interface does not have any physical ports associated with
Status	it, its entry is displayed in light gray text. Click the Detail icon to go to a
Summary	(more detailed) summary screen of interface statistics.
#	This shows how many interfaces there are.
Name	This field displays the name of each interface.
Status	This field displays the current status of each interface. The possible
	values depend on what type of interface it is.
	For Ethernet interfaces:
	Inactive - The Ethernet interface is disabled.
	Down - The Ethernet interface does not have any physical ports
	associated with it or the Ethernet interface is enabled but not connected.
	Speed / Duplex - The Ethernet interface is enabled and connected.
	This field displays the port speed and duplex setting (Full or Half).
	(For USG 20W only) The status for an installed WLAN card is none.
	For cellular (3G) interfaces, see Section 9.11 on page 195 for the status
	that can appear.
Zone	This field displays the zone to which the interface is currently assigned.
IP Address	This field displays the current IP address assigned to the interface. If the
	IP address is 0.0.0.0, the interface is disabled or did not receive an IP
	address and subnet mask via DHCP.
	If this interface is a member of an active virtual router, this field displays
	the IP address it is currently using. This is either the static IP address of
	the interface (if it is the master) or the management IP address (if it is a
	backup).
Action	Use this field to get or to update the IP address for the interface.
	Click Renew to send a new DHCP request to a DHCP server.
	Click the Connect icon to have the ZyWALL try to connect a PPPoE/PPTP
	interface. If the interface cannot use one of these ways to get or to
	update its IP address, this field displays n/a.
	Click the Disconnect icon to stop a PPPoE/PPTP connection.
Extension Slot	This section of the screen displays the status of the extension card slot
	and the USB ports.
Slot	This field displays the name of each extension slot.
Device	This field displays the name of the device connected to the extension slot
	(or none if no device is detected).
Status	For cellular (3G) interfaces, see Section 9.11 on page 195 for the status
	that can appear.
Licensed
Service Status
#	This shows how many licensed services there are.
Status	This is the current status of the license.
Name	This identifies the licensed service.

170
	ZyWALL USG 20/20W User’s Guide