ZyXEL Communications unified security gateway manual 782

Appendix A Log Descriptions

Table 256 NAT Logs (continued)

LOG MESSAGE	DESCRIPTION
%s SIP ALG has	The SIP ALG has been turned on or off. %s: Enable or Disable
succeeded.
Extra signal port of	Extra SIP ALG port has been changed.
SIP ALG has been
modified.
Signal port of SIP ALG	Default SIP ALG port has been changed.
has been modified.
Register SIP ALG extra	SIP ALG apply additional signal port failed.
port=%d failed.	%d: Port number
Register SIP ALG	SIP ALG apply signal port failed.
signal port=%d failed.	%d: Port number
Register H.323 ALG	H323 ALG apply additional signal port failed.
extra port=%d failed.	%d: Port number
Register H.323 ALG	H323 ALG apply signal port failed.
signal port=%d failed.	%d: Port number
Register FTP ALG extra	FTP ALG apply additional signal port failed.
port=%d failed.	%d: Port number
Register FTP ALG	FTP ALG apply signal port failed.
signal port=%d failed.	%d: Port number

Table 257 PKI Logs

LOG MESSAGE	DESCRIPTION
Generate	The router created an X509 format certificate with the
X509certifiate "%s"	specified name.
successfully
Generate X509	The router was not able to create an X509 format certificate
certificate "%s"	with the specified name. See Table 282 on page 784 for
failed, errno %d	details about the error number.
Generate certificate	The router created a certificate request with the specified
request "%s"	name.
successfully
Generate certificate	The router was not able to create a certificate request with
request "%s" failed,	the specified name. See Table 282 on page 784 for details
errno %d	about the error number.
Generate PKCS#12	The router created a PKCS#12 format certificate with the
certificate "%s"	specified name.
successfully
Generate PKCS#12	The router was not able to create anPKCS#12 format
certificate "%s"	certificate with the specified name. See Table 282 on page
failed, errno %d	784 for details about the error number.

782
	ZyWALL USG 20/20W User’s Guide