Chapter 9 Monitor

The following table describes the labels in this screen.

Table 37 Monitor > System Status > USB Storage

LABEL

DESCRIPTION

Device

This is a basic description of the type of USB device.

description

 

 

 

Usage

This field displays how much of the USB storage device’s capacity is

 

currently being used out of its total capacity and what percentage that

 

makes.

 

 

Filesystem

This field displays what file system the USB storage device is formatted

 

with. This field displays Unknown if the file system of the USB storage

 

device is not supported by the ZyWALL, such as NTFS.

 

 

Speed

This field displays the connection speed the USB storage device

 

supports.

 

 

Status

Ready - you can have the ZyWALL use the USB storage device.

 

Click Remove Now to stop the ZyWALL from using the USB storage

 

device so you can remove it.

 

Unused - the connected USB storage device was manually unmounted

 

by using the Remove Now button or for some reason the ZyWALL

 

cannot mount it.

 

Click Use It to have the ZyWALL mount a connected USB storage

 

device. This button is grayed out if the file system is not supported

 

(unknown) by the ZyWALL.

 

none - no USB storage device is connected.

 

 

Detail

This field displays any other information the ZyWALL retrieves from the

 

USB storage device.

 

Deactivated - the use of a USB storage device is disabled (turned off)

 

on the ZyWALL.

 

OutofSpace - the available disk space is less than the disk space full

 

threshold (see Section 43.2 on page 630 for how to configure this

 

threshold).

 

Mounting - the ZyWALL is mounting the USB storage device.

 

Removing - the ZyWALL is unmounting the USB storage device.

 

none - the USB device is operating normally or not connected.

 

 

9.12 The IPSec Monitor Screen

You can use the IPSec Monitor screen to display and to manage active IPSec SAs. To access this screen, click Monitor > VPN Monitor > IPSec. The following

196

 

ZyWALL USG 20/20W User’s Guide