Chapter 11 Interfaces

Table 57 Configuration > Network > Interface > Cellular > Add (continued)

LABEL

DESCRIPTION

Actions when over

Specify the actions the ZyWALL takes when the specified percentage

% of time budget

of time budget or data limit is exceeded. Enter a number from 1 to 99

or % of data

in the percentage fields. If you change the value after you configure

budget

and enable budget control, the ZyWALL resets the statistics.

 

Select None to not create a log when the ZyWALL takes this action,

 

Log to create a log, or Log-alertto create an alert log. If you select

 

Log or Log-alertyou can also select recurring every to have the

 

ZyWALL send a log or alert for this event periodically. Specify how

 

often (from 1 to 65535 minutes) to send the log or alert.

 

 

OK

Click OK to save your changes back to the ZyWALL.

 

 

Cancel

Click Cancel to exit this screen without saving.

 

 

11.6 WLAN Interface General Screen

This feature is available for USG 20W only.

The following figure provides an example of a wireless network. The wireless network is in the blue circle. Wireless clients (A and B) connect to an access point (AP) to access other devices (such as the printer) or the Internet. Your ZyWALL works as an AP when you install a compatible WLAN card.

Figure 167 Example of a Wireless Network

248

 

ZyWALL USG 20/20W User’s Guide