ZyXEL Communications unified security gateway 18.2 The HTTP Redirect Screen

Chapter 18 HTTP Redirect

Finding Out More

See Section 6.5.10 on page 99 for related information on these screens.

To configure redirection of a HTTP request to a proxy server, click Configuration

>Network > HTTP Redirect. This screen displays the summary of the HTTP redirect rules.

Note: You can configure up to one HTTP redirect rule for each (incoming) interface.

Figure 209 Configuration > Network > HTTP Redirect

The following table describes the labels in this screen.

Table 96 Configuration > Network > HTTP Redirect

LABEL	DESCRIPTION
Add	Click this to create a new entry.

Edit	Double-click an entry or select it and click Edit to open a screen where
	you can modify the entry’s settings.

Remove	To remove an entry, select it and click Remove. The ZyWALL confirms
	you want to remove it before doing so.

Activate	To turn on an entry, select it and click Activate.

Inactivate	To turn off an entry, select it and click Inactivate.

#	This field is a sequential value, and it is not associated with a specific
	entry.

Status	This icon is lit when the entry is active and dimmed when the entry is
	inactive.

Name	This is the descriptive name of a rule.

Interface	This is the interface on which the request must be received.

Proxy Server	This is the IP address of the proxy server.

Port	This is the service port number used by the proxy server.

Apply	Click Apply to save your changes back to the ZyWALL.

Reset	Click Reset to return the screen to its last-saved settings.