Chapter 4 Installation Setup Wizard

IP Address: Enter your (static) public IP address. Auto displays if you selected Auto as the IP Address Assignment in the previous screen.

The following fields display if you selected static IP address assignment.

IP Subnet Mask: Enter the subnet mask for this WAN connection's IP address.

Gateway IP Address: Enter the IP address of the router through which this WAN connection will send traffic (the default gateway).

First / Second DNS Server: These fields display if you selected static IP address assignment. The Domain Name System (DNS) maps a domain name to an IP address and vice versa. Enter a DNS server's IP address(es). The DNS server is extremely important because without it, you must know the IP address of a computer before you can access it. The ZyWALL uses these (in the order you specify here) to resolve domain names for VPN, DDNS and the time server. Leave the field as 0.0.0.0 if you do not want to configure DNS servers.

4.1.3Internet Access: PPPoE

Note: Enter the Internet access information exactly as given to you by your ISP.

Figure 26 Internet Access: PPPoE Encapsulation

4.1.3.1ISP Parameters

Type the PPPoE Service Name from your service provider. PPPoE uses a service name to identify and reach the PPPoE server. You can use alphanumeric and - _@$./ characters, and it can be up to 64 characters long.

Authentication Type - Select an authentication protocol for outgoing connection requests. Options are:

 

61

ZyWALL USG 20/20W User’s Guide