ZyXEL Communications unified security gateway manual 791

Appendix A Log Descriptions

Table 258 Interface Logs (continued)

LOG MESSAGE	DESCRIPTION
name=%s,status=%s,TxP	This log is sent to the VRPT server to show the specified PPP/
kts=%u,	Cellular interface’s statistics and uptime.
RxPkts=%u,Colli.=%u,T	The arguments represent the interface name, interface
xB/s=%u,
	status, interface Tx packets, interface Rx packets, interface
RxB/s=%u,UpTime=%s
	collision packets, interface Tx Bytes/s, interface Rx Bytes/s,
	and interface up time.
Interface %s has been	The user-configurable name of the specified interface
renamed from '%s' to	(internal system name) has been renamed from one name to
'%s '	another.

Table 259 WLAN Logs

LOG MESSAGE	DESCRIPTION
Wlan %s is enabled.	The WLAN (IEEE 802.11 b and or g) feature has been turned
	on. %s is the slot number where the WLAN card is or can be
	installed.
Wlan %s is disabled.	The WLAN (IEEE 802.11 b and or g) feature has been turned
	off. %s is the slot number where the WLAN card is or can be
	installed.
Wlan %s has been	The WLAN (IEEE 802.11 b and or g) feature’s configuration
configured.	has been changed. %s is the slot number where the WLAN
	card is or can be installed.
Interface %s has been	The configuration of the specified WLAN interface (%s) has
configured.	been changed.
Interface %s has been	The specified WLAN interface (%s) has been removed.
deleted.
Create interface %s	The wireless device failed to create the specified WLAN
has failed. Wlan	interface (%s). Remove the wireless device and reinstall it.
device does not exist.
System internal error.	IEEE 802.1x or WPA is not enabled.
No 802.1X or WPA
enabled!
System internal error.	The ZyWALL was not able to configure the wireless device to
Error configuring WPA	use WPA. Remove the wireless device and reinstall it.
state!
System internal error.	The ZyWALL was not able to enable WPA/IEEE 802.1X.
Error enabling WPA/
802.1X!
Station has	A wireless client with the specified MAC address (second %s)
associated. Interface:	associated with the specified WLAN interface (first %s).
%s, MAC: %s.
WPA or WPA2 enterprise	There was an EAP timeout for a wireless client connected to
EAP timeout.	the specified WLAN interface (first %s). The MAC address of
Interface: %s, MAC:	the wireless client is listed (second %s).
%s.

	791
ZyWALL USG 20/20W User’s Guide