Chapter 24 SSL VPN

24.3 The SSL Global Setting Screen

Click VPN > SSL VPN and click the Global Setting tab to display the following screen. Use this screen to set the IP address of the ZyWALL (or a gateway device) on your network for full tunnel mode access, enter access messages or upload a custom logo to be displayed on the remote user screen.

Figure 254 VPN > SSL VPN > Global Setting

The following table describes the labels in this screen.

Table 124 VPN > SSL VPN > Global Setting

LABEL

DESCRIPTION

Global Setting

 

 

 

Network

Specify the IP address of the ZyWALL (or a gateway device) for full

Extension Local

tunnel mode SSL VPN access.

IP

Leave this field to the default settings unless it conflicts with another

 

 

interface.

 

 

SSL VPN Login

 

Domain Name

 

 

 

SSL VPN Login

Specify a domain name for users to use for SSL VPN login. The domain

Domain Name

name must be registered to one of the ZyWALL’s IP addresses or be one

1/2

of the ZyWALL’s DDNS entries. You can specify up to two domain names

 

so you could use one domain name for each of two WAN ports. Do not

 

include the host. For example, www.zyxel.com is a fully qualified

 

domain name where “www” is the host; so you would just use

 

“zyxel.com”.

 

The ZyWALL displays the normal login screen without the button for

 

logging into the Web Configurator.

 

 

 

433

ZyWALL USG 20/20W User’s Guide