Chapter 11 Interfaces

11.8.1 VLAN Summary Screen

This screen lists every VLAN interface and virtual interface created on top of VLAN interfaces. To access this screen, click Configuration > Network > Interface > VLAN.

Figure 176 Configuration > Network > Interface > VLAN

Each field is explained in the following table.

Table 65 Configuration > Network > Interface > VLAN

LABEL

DESCRIPTION

Edit

Double-click an entry or select it and click Edit to open a screen where you

 

can modify the entry’s settings.

 

 

Remove

To remove an entry, select it and click Remove. The ZyWALL confirms you

 

want to remove it before doing so.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

Create

To open the screen where you can create a virtual interface, select an

Virtual

interface and click Create Virtual Interface.

Interface

 

 

 

Object

Select an entry and click Object References to open a screen that shows

References

which settings use the entry. See Section 11.3.2 on page 232 for an

 

example.

 

 

#

This field is a sequential value, and it is not associated with any interface.

 

 

Status

This icon is lit when the entry is active and dimmed when the entry is

 

inactive.

 

 

Name

This field displays the name of the interface.

 

 

Port/VID

For VLAN interfaces, this field displays

 

• the Ethernet interface on which the VLAN interface is created

 

• the VLAN ID

 

For virtual interfaces, this field is blank.

 

 

IP Address

This field displays the current IP address of the interface. If the IP address is

 

0.0.0.0, the interface does not have an IP address yet.

 

This screen also shows whether the IP address is a static IP address

 

(STATIC) or dynamically assigned (DHCP). IP addresses are always static

 

in virtual interfaces.

 

 

Mask

This field displays the interface’s subnet mask in dot decimal notation.

 

 

266

 

ZyWALL USG 20/20W User’s Guide