Chapter 4 Installation Setup Wizard

The screens vary depending on the encapsulation type. Refer to information provided by your ISP to know what to enter in each field. Leave a field blank if you don’t have that information.

Note: Enter the Internet access information exactly as your ISP gave it to you.

Figure 24 Internet Access: Step 1

Encapsulation: Choose the Ethernet option when the WAN port is used as a regular Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection according to the information from your ISP.

WAN Interface: This is the interface you are configuring for Internet access.

Zone: This is the security zone to which this interface and Internet connection belong.

IP Address Assignment: Select Auto if your ISP did not assign you a fixed IP address.

Select Static if the ISP assigned a fixed IP address.

4.1.2Internet Access: Ethernet

This screen is read-only if you set the previous screen’s IP Address Assignment field to Auto. Use this screen to configure your IP address settings.

Note: Enter the Internet access information exactly as given to you by your ISP.

Figure 25 Internet Access: Ethernet Encapsulation

Encapsulation: This displays the type of Internet connection you are configuring.

First WAN Interface: This is the number of the interface that will connect with your ISP.

Zone: This is the security zone to which this interface and Internet connection will belong.

60

 

ZyWALL USG 20/20W User’s Guide