Chapter 28 Bandwidth Management

28.2 TheBandwidth Management Screen

The Bandwidth management screen controls the default policy for TCP and UDP traffic. You can use source zone, destination zone, destination port, schedule, user, source, and destination information as criteria to create a sequence of specific conditions, similar to the sequence of rules used by firewalls, to specify what the ZyWALL should do more precisely.This screen also allows you to add, edit, and remove conditions to this default policy.

Click Configuration > Bandwidth Management to open the following screen.

Figure 286 Configuration > Bandwidth Management

The following table describes the labels in this screen. See Section 28.2.1 on page 463 for more information as well.

Table 131 Configuration > Bandwidth Management

LABEL

DESCRIPTION

Enable BWM

Select this check box to activate management bandwidth.

 

 

Add

Click this to create a new entry. Select an entry and click Add to create a

 

new entry after the selected entry.

 

 

Edit

Select an entry and click this to be able to modify it.

 

 

Remove

Select an entry and click this to delete it.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

Move

To change an entry’s position in the numbered list, select it and click

 

Move to display a field to type a number for where you want to put that

 

entry and press [ENTER] to move the entry to the number that you

 

typed.

 

 

Status

The activate (light bulb) icon is lit when the entry is active and dimmed

 

when the entry is inactive.

 

 

 

461

ZyWALL USG 20/20W User’s Guide