Chapter 20 IP/MAC Binding

20.1.2 What You Need to Know

DHCP

IP/MAC address bindings are based on the ZyWALL’s dynamic and static DHCP entries.

Interfaces Used With IP/MAC Binding

IP/MAC address bindings are grouped by interface. You can use IP/MAC binding with Ethernet, bridge, VLAN, and WLAN (for USG 20W) interfaces. You can also enable or disable IP/MAC binding and logging in an interface’s configuration screen.

20.2 IP/MAC Binding Summary

Click Configuration > Network > IP/MAC Binding to open the IP/MAC Binding Summary screen. This screen lists the total number of IP to MAC address bindings for devices connected to each supported interface.

Figure 217 Configuration > Network > IP/MAC Binding > Summary (USG 20W)

The following table describes the labels in this screen.

Table 99 Configuration > Network > IP/MAC Binding > Summary

LABEL

DESCRIPTION

Edit

Double-click an entry or select it and click Edit to open a screen where you

 

can modify the entry’s settings.

 

 

Activate

To turn on an entry, select it and click Activate.

 

 

Inactivate

To turn off an entry, select it and click Inactivate.

 

 

#

This field is a sequential value, and it is not associated with a specific entry.

 

 

360

 

ZyWALL USG 20/20W User’s Guide