ZyXEL Communications WAP3205 Click Maintenance > Password

Chapter 12 Maintenance

The following table describes the labels in this screen.

Table 45 Maintenance > General

LABEL	DESCRIPTION
Administrator	Type how many minutes a management session can be left idle before the session times
Inactivity Timer	out. The default is 5 minutes. After it times out you have to log in with your password
	again. Very long idle timeouts may have security risks. A value of "0" means a
	management session never times out, no matter how long it has been left idle (not
	recommended).
Apply	Click Apply to save your changes back to the WAP3205 v2.
Reset	Click Reset to begin configuring this screen afresh.

12.4 Password Screen

It is strongly recommended that you change your WAP3205 v2's password.

If you forget your WAP3205 v2's password (or IP address), you will need to reset the device. See Section 12.8 on page 111 for details

Click Maintenance > Password.

Figure 73 Maintenance > Password

The following table describes the labels in this screen.

Table 46 Maintenance > Password

LABEL	DESCRIPTION
Password Setup	Change your WAP3205 v2’s password (recommended) using the fields as shown.
Old Password	Type the default password or the existing password you use to access the system in
	this field.
New Password	Type your new system password (up to 30 characters). Note that as you type a
	password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm	Type the new password again in this field.
Apply	Click Apply to save your changes back to the WAP3205 v2.
Reset	Click Reset to begin configuring this screen afresh.

106
	WAP3205 v2 User’s Guide