Chapter 4 Client Mode
Table 6 Status Screen: Client Mode
LABEL | DESCRIPTION |
Interface | This displays the WAP3205 v2 port types. The port types are: LAN and WLAN. |
|
|
Status | For the LAN ports, this field displays Down (line is down) or Up (line is up or connected). |
| For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is |
| disabled. |
|
|
Rate | For the LAN ports, this displays the port speed or N/A when the line is disconnected. |
| For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/ |
| A when the WLAN is disabled. |
|
|
System Status |
|
|
|
Item | This column shows the type of data the WAP3205 v2 is recording. |
|
|
Data | This column shows the actual data recorded by the WAP3205 v2. |
|
|
System Up Time | This is the total time the WAP3205 v2 has been on. |
|
|
Current Date/Time | This field displays your WAP3205 v2’s present date and time. |
|
|
System Resource |
|
|
|
CPU Usage | This displays what percentage of the WAP3205 v2’s processing ability is currently used. |
| When this percentage is close to 100%, the WAP3205 v2 is running at full load, and the |
| throughput is not going to improve anymore. If you want some applications to have more |
| throughput, you should turn off other applications (for example, using bandwidth |
| management. |
|
|
Memory Usage | This shows what percentage of the heap memory the WAP3205 v2 is using. |
|
|
System Setting |
|
|
|
Configuration Mode | This shows the web configurator mode you are viewing - Expert. |
|
|
Summary |
|
|
|
Packet Statistics | Click Details... to go to the Monitor > Packet Statistics screen (Section 9.4 on page 80). |
| Use this screen to view port status and packet specific statistics. |
|
|
4.6 Wireless LAN Profile Screen
Use this screen to view the wireless LAN profile settings of your WAP3205 v2. Go to Configuration
>Wireless LAN > Profile to open the following screen.
Figure 11 Client Mode: Wireless LAN > Profile
26 |
|
WAP3205 v2 User’s Guide | |
|
|