Chapter 4 Client Mode
4.8 WPS Screen
Use this screen to enable
Figure 17 Client Mode: Wireless LAN > WPS
The following table describes the labels in this screen.
Table 13 Client Mode: Wireless LAN > WPS
LABEL | DESCRIPTION |
Station Site Survey | |
|
|
# | Use the radio button to select the wireless device to which you want to connect using WPS. |
|
|
SSID | This displays the SSID of the wireless device. |
|
|
BSSID | This displays the MAC address of the wireless device. |
|
|
Signal Strength | This displays the strength of the wireless signal. The signal strength mainly depends on the |
| antenna output power and the distance between your WAP3205 v2 and this device. |
|
|
Ch. | This displays the channel number used by this wireless device. |
|
|
Auth. | This displays the authentication method used by this wireless device. |
|
|
Encrypt | This displays the data encryption method used by this wireless device. |
|
|
Ver. | This displays the firmware version running on the wireless device. |
|
|
Status | This displays Conf. (configured) when WPS has been set up on the wireless device. |
| This displays Unconf. (unconfigured) if WPS has not been set up on the wireless device. |
|
|
PIN | This displays the PIN number of the WAP3205 v2. |
|
|
Renew PIN | Click this button to generate a new PIN and display it in the PIN field. |
|
|
PIN Start | Click this button to perform wireless security information synchronization using the PIN |
| configuration method. |
|
|
PBC Start | Click this button to perform wireless security information synchronization using the Push |
| Button Configuration (PBC) method. |
|
|
Rescan | Click this button to search for available for |
| and update this table. |
|
|
32 |
|
WAP3205 v2 User’s Guide | |
|
|