Chapter 10 Wireless LAN

 

 

 

 

Table 34 Network > Wireless LAN > Security: WPA-PSK/WPA2-PSK

 

LABEL

DESCRIPTION

 

WPA

This field appears when you choose WPA2-PSKas the Security Mode.

 

Compatible

Check this field to allow wireless devices using WPA-PSKsecurity mode to connect to

 

 

 

 

your WAP3205 v2.

 

 

 

 

Pre-Shared Key

WPA-PSK/WPA2-PSKuses a simple common password for authentication.

 

 

Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.

 

 

 

 

Group Key Update

The Group Key Update Timer is the rate at which the AP sends a new group key out to

 

Timer

all clients.

 

 

The default is 3600 seconds (60 minutes).

 

 

 

 

Apply

Click Apply to save your changes back to the WAP3205 v2.

 

 

 

 

Reset

Click Reset to reload the previous configuration for this screen.

 

 

 

10.5.4 WPA/WPA2 Authentication

Use this screen to configure and enable WPA or WPA2 authentication. Select WPA or WPA2 from the Security Mode list.

Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2 in the Wireless LAN > Security screen.

Note: If you select WPA or WPA2 for the first SSID of the WAP3205 v2 in the Wireless LAN > Security screen, you cannot enable the WPS feature on the WAP3205 v2.

Figure 60 Network > Wireless LAN > Security: WPA/WPA2

 

91

WAP3205 v2 User’s Guide