ZyXEL Communications WAP3205 manual 54

Chapter 7 Connection Wizard

The following table describes the labels in this screen.

Table 25 Wireless Security: No Security

LABEL	DESCRIPTION
Wireless	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
Network Name	If you change this field on the WAP3205 v2, make sure all wireless clients use the same
(SSID)
	SSID in order to access the network.
Security mode	Select a security level from the drop-down list box.
	Choose None to have no wireless LAN security configured. If you do not enable any wireless
	security on your WAP3205 v2, your network is accessible to any wireless networking device
	that is within range.
Exit	Click this to close the wizard screen without saving.
Back	Click this to return to the previous screen.
Next	Click this to continue.

Wireless Security: WPA-PSK/WPA2-PSK

Choose WPA-PSKor WPA2-PSKsecurity in the Security mode field to set up a password for your wireless network.

Figure 38 Wireless Security: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

Table 26 Wireless Security: WPA-PSK/WPA2-PSK

LABEL	DESCRIPTION
Wireless	Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
Network Name	If you change this field on the WAP3205 v2, make sure all wireless stations use the same
(SSID)
	SSID in order to access the network.
Security mode	Choose WPA-PSKor WPA2-PSKsecurity to configure a Pre-Shared Key. Choose this
	option only if your wireless clients support WPA-PSK or WPA2-PSK respectively.
Wireless	Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless
password	connection by configuring WPA in the wireless LAN screens.
Verify Password	Retype the password to confirm.

54
	WAP3205 v2 User’s Guide