Chapter 4 Client Mode
Table 11 Client Mode: Wireless LAN > Profile:
LABEL | DESCRIPTION |
Apply | Click Apply to save your changes back to the WAP3205 v2. |
|
|
Back | Click Back to go back to the previous screen. |
|
|
4.7 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration > Wireless LAN > Site Survey to open the following screen.
Figure 16 Client Mode: Wireless LAN > Site Survey
The following table describes the labels in this screen.
Table 12 Client Mode: Wireless LAN > Site Survey
LABEL | DESCRIPTION |
Station Site Survey | |
|
|
# | Select a wireless device and click Add Profile to open a configuration screen where you |
| can add the selected wireless device to a profile and then enable it. |
|
|
SSID | This displays the SSID of the wireless device. |
| indicates the wireless device is added to an activated profile and the WAP3205 v2 is |
| connecting to it. |
|
|
BSSID | This displays the MAC address of the wireless device. |
|
|
Signal Strength | This displays the strength of the wireless signal. The signal strength mainly depends on the |
| antenna output power and the distance between your WAP3205 v2 and this device. |
|
|
Channel | This displays the channel number used by this wireless device. |
|
|
Encryption | This displays the data encryption method used by this wireless device. |
|
|
Authentication | This displays the authentication method used by this wireless device. |
|
|
Network Type | This displays the network type (Infrastructure or Ad Hoc) of this wireless device. |
|
|
Rescan | Click this button to search for available wireless devices within transmission range and |
| update this table. |
|
|
Add Profile | Select a wireless device and click this button to add it to a profile. |
|
|
| 31 |
WAP3205 v2 User’s Guide | |
|
|