Chapter 5 Universal Repeater Mode
Note: Wireless clients cannot use WPS to set up a wireless network with the WAP3205 v2 in universal repeater mode.
Figure 20 Universal Repeater: WLAN > WPS
The following table describes the labels in this screen.
Table 15 Universal Repeater: WLAN > WPS
LABEL | DESCRIPTION |
Station Site Survey | |
|
|
# | Use the radio button to select the wireless device to which you want to connect using WPS. |
|
|
SSID | This displays the SSID of the wireless device. |
|
|
BSSID | This displays the MAC address of the wireless device. |
|
|
Signal Strength | This displays the strength of the wireless signal. The signal strength mainly depends on the |
| antenna output power and the distance between your WAP3205 v2 and this device. |
|
|
Channel | This displays the channel number used by this wireless device. |
|
|
Encryption | This displays the data encryption method used by this wireless device. |
|
|
Authentication | This displays the authentication method used by this wireless device. |
|
|
WPS State | This displays YES (configured) when WPS has been set up on the wireless device. |
| This displays NO (unconfigured) if WPS has not been set up on the wireless device. |
|
|
PIN | This displays the PIN number of the WAP3205 v2. |
|
|
Renew PIN | Click this button to generate a new PIN and display it in the PIN field. |
|
|
PIN Start | Click this button to perform wireless security information synchronization using the PIN |
| configuration method. |
|
|
PBC Start | Click this button to perform wireless security information synchronization using the Push |
| Button Configuration (PBC) method. |
|
|
Rescan | Click this button to search for available for |
| and update this table. |
|
|
5.7 Universal Repeater Screen
Use this screen to enter the SSID and select the wireless security mode used by the wireless device to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to open the Universal Repeater screen. The screen varies depending on security mode.
| 37 |
WAP3205 v2 User’s Guide | |
|
|