Chapter 6 Introducing the Web Configurator

6.3 Resetting the WAP3205 v2

If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the RESET button at the back of the WAP3205 v2 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to “1234” and the IP address will be reset to “192.168.1.2”.

6.3.1 Procedure to Use the Reset Button

1Make sure the power LED is on.

2Press the RESET button for longer than 1 second to restart/reboot the WAP3205 v2.

3Press the RESET button for longer than five seconds to set the WAP3205 v2 back to its factory- default configurations.

 

47

WAP3205 v2 User’s Guide