Chapter 10 Wireless LAN
10.9 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab.
Note: With WPS, wireless clients can only connect to the wireless network using the first SSID on the WAP3205 v2.
Figure 64 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 39 Network > Wireless LAN > WPS
LABEL | DESCRIPTION |
WPS Setup |
|
|
|
Enable WPS | Select this to enable the WPS feature. |
|
|
PIN Number | This displays a PIN number last time system generated. Click Generate to generate a |
| new PIN number. |
|
|
Status |
|
|
|
Status | This displays Configured when the WAP3205 v2 has connected to a wireless network |
| using WPS or when Enable WPS is selected and wireless or wireless security settings |
| have been changed. The current wireless and wireless security settings also appear in the |
| screen. |
| This displays Unconfigured if WPS is disabled and there are no wireless or wireless |
| security changes on the WAP3205 v2 or you click Release_Configuration to remove the |
| configured wireless and wireless security settings. |
|
|
Release | This button is only available when the WPS status displays Configured. |
Configuration | Click this button to remove all configured wireless and wireless security settings for WPS |
| |
| connections on the WAP3205 v2. |
|
|
802.11 Mode | This is the 802.11 mode used. Only compliant WLAN devices can associate with the |
| WAP3205 v2. |
|
|
SSID | This is the name of the wireless network (the WAP3205 v2’s first SSID). |
|
|
Security | This is the type of wireless security employed by the network. |
|
|
Apply | Click Apply to save your changes back to the WAP3205 v2. |
|
|
Cancel | Click Cancel to reload the previous configuration for this screen. |
|
|
96 |
|
WAP3205 v2 User’s Guide | |
|
|