Chapter 5 Universal Repeater Mode
The following table describes the labels in this screen.
Table 19 Universal Repeater Mode: Wireless LAN > Site Survey
LABEL | DESCRIPTION |
Station Site Survey | |
|
|
# | Select a wireless device and click Setting to go to the Universal Repeater screen with |
| the selected wireless device’s wireless setttings configured. You then just need to enter the |
| security key (if required) and click Apply in the Universal Repeater screen to connect to |
| the selected wireless device. |
|
|
SSID | This displays the SSID of the wireless device. |
| indicates the wireless device is added to an activated profile and the WAP3205 v2 is |
| connecting to it. |
|
|
BSSID | This displays the MAC address of the wireless device. |
|
|
Signal Strength | This displays the strength of the wireless signal. The signal strength mainly depends on the |
| antenna output power and the distance between your WAP3205 v2 and this device. |
|
|
Channel | This displays the channel number used by this wireless device. |
|
|
Encryption | This displays the data encryption method used by this wireless device. |
|
|
Authentication | This displays the authentication method used by this wireless device. |
|
|
Network Type | This displays the network type (In (Infrastructure) or Ad Hoc) of this wireless device. |
|
|
Rescan | Click this button to search for available wireless devices within transmission range and |
| update this table. |
|
|
Setting | Select a wireless device and click this button to have the WAP3205 v2 automatically |
| configure the selected wireless device’s wireless settings in the Universal Repeater |
| screen. |
|
|
42 |
|
WAP3205 v2 User’s Guide | |
|
|