ZyXEL Communications WAP3205 90%, 75%, 50%, 25%, 10%, 100%

Chapter 10 Wireless LAN

10.7 Wireless LAN Advanced Screen

Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold and high-throughput physical mode settings.

Click Network > Wireless LAN > Advanced. The screen appears as shown.

Figure 62 Network > Wireless LAN > Advanced

The following table describes the labels in this screen.

Table 37 Network > Wireless LAN > Advanced

LABEL	DESCRIPTION
RTS/CTS	Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
Threshold	(Clear To Send) handshake.
Fragmentation	The threshold (number of bytes) for the fragmentation boundary for directed messages. It
Threshold	is the maximum data fragment size that can be sent. Enter an even number between 256
	and 2346.
Output Power	Set the output power of the WAP3205 v2 in this field. If there is a high density of APs in an
	area, decrease the output power of the WAP3205 v2 to reduce interference with other APs.
	Select one of the following 100%, 90%, 75%, 50%, 25% or 10%. See the product
	specifications for more information on your WAP3205 v2’s output power.
Network Mode	Select 11b only to allow only IEEE 802.11b compliant WLAN devices to associate with the
	WAP3205 v2.
	Select 11g only to allow only IEEE 802.11g compliant WLAN devices to associate with the
	WAP3205 v2.
	Select 11n only to allow only IEEE 802.11n compliant WLAN devices to associate with the
	WAP3205 v2.
	Select 11 b/g mixed mode to allow both IEEE802.11b and IEEE802.11g compliant WLAN
	devices to associate with the WAP3205 v2. The transmission rate of your WAP3205 v2
	might be reduced.
	Select 11 b/g/n mixed mode to allow both IEEE802.11b, IEEE802.11g and IEEE802.11n
	compliant WLAN devices to associate with the WAP3205 v2. The transmission rate of your
	WAP3205 v2 might be reduced.

94
	WAP3205 v2 User’s Guide